Contact

Let’s discuss your project.

Contact REPN-FZCO directly or prepare an enquiry using the form below.

YOUR WELL PARAMETERS

Match the numbers.

References 1–7 identify the required well parameters in the form.

Numbered well sketch: 1 diameter, 2 well depth, 3 dynamic level, 4 static level, 5 flow, 6 temperature, 7 wellhead pressure — Schematic reference. Depths are measured from ground level.

Download questionnaire (English, Word)

Prepare an enquiry

Fields marked * are required. Water chemistry and additional operating information are optional.

Project details

Well number / ID

Application area

Equipment / service Project location

Your contact details

Company Contact name Email

Required well parameters

Use references 1–7 in the well sketch.

1Borehole diameter

Select the unit for the diameter you enter.

2Well depth

Depth from ground level to the bottom of the well.

3Dynamic water level

Depth below ground level while pumping.

4Static water level

Depth below ground level when the well is at rest.

5Well flow rate

m³/h

Flow rate for the requested operating point.

6Water temperature

°C

Water temperature for equipment selection.

7Design pressure at wellhead

bar

Design pressure required at the wellhead.

Additional operating informationOptional

Match references 8–14 in the sketch to the fields below. Leave anything you do not know blank.

Additional operating information — references 8 to 14 — Pump duty, installation dimensions, fluid data and power supply. Numbers match the optional fields below.

8Required headmRequired pump head in metres. This is not the pump installation depth.9Pump installation depthmPlanned pump depth below ground level. State the reference point used in your notes.10Casing inside diametermmClear inside diameter of the casing, not the borehole diameter.11Fluid densitykg/m³Density of the pumped fluid, if known, in kg/m³.12Free gas at pump intake%Free-gas percentage at pump-intake conditions, if known.13Suspended solidsmg/LConcentration of suspended solids in the fluid, if known, in mg/L.14Existing power supply / VSDAvailable power supply and existing VSD details, if known.

Chemical composition of waterOptional — provide only if available

Leave values blank if no analysis is available. pH is dimensionless.

pHHCO3 mg/LCO3 mg/LCl mg/LSO4 mg/LH2S mg/LChemical composition of the injected inhibitor

How can we help?

Send your enquiry directly to office@repnfzco.com with the completed Word questionnaire attached, or download it for your records.

Checking direct sending…

Print the completed Word layout or a blank questionnaire, including both numbered drawings.

Downloads and print views are prepared in your browser. Nothing is submitted by downloading or printing.

Use the Print questionnaire button on the contact page to print the completed Word layout with your latest entries.